Configuring the Remote Gateway 9150 unit
Configuring automatic upgrade
To configure automatic upgrade of your Remote Gateway 9150 unit, complete
the following steps:
1
Access the Auto Upgrade Configuration property sheet.
2
Complete the fields as described in "Auto Upgrade Configuration field
descriptions" on page 245.
3
Click on the OK button.
Result: Configuration Manager writes the changes to a temporary file on
the administration PC.
4
Click on the Send button to update the Remote Gateway 9150 unit with the
new information.
Note: To save changes to the Remote Gateway 9150 unit's Flash memory,
select Upload
244
→
Save to Flash from the Menu Bar.
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0