Nortel Remote Gateway 9150 Installation And Administration Manual page 512

Display log definitions
Statistic
LOG NUMBER
DESCRIPTION
SEVERITY
TASK
PRODUCT
CANCELLATION
ACTION TO BE TAKEN
PARAMETERS
DISPLAYED TEXT
484
Definition
86
This log indicates that a DSP failure was detected and automatic
dynamic recovery was initiated.
WARNING
VPM
RLC, 9150
None
None
1) Single-digit DSP device ID
2) DSP module number
3) DSP device number
4) If the user manually initiates the request, the cause shows as User.
If the reload arose from detection of DSP failure and subsequent
automatic dynamic DSP recovery, the cause shows as Auto.
Note: If the DSP has already been taken out of service (OOS) due
to catastrophic failure, the code ignores the reload request and
leaves the DSP OOS.
DSP #P1 reloading. (Mod, Dev) = (P2, P3) Cause: P4
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0