Auto Logoff; Logging On To A Unit Using The Connection History - Nortel Remote Gateway 9150 Installation And Administration Manual

Using Configuration Manager

Auto logoff

If the connection remains open with no activity for 15 minutes, then
Configuration Manager automatically logs off the connection and the Session
Timed Out message displays. This helps to secure the configuration in the event
that you walk away from the administration PC while logged on to a unit.

Logging on to a unit using the connection history

1 From the Menu Bar, choose Connect
of the unit you want to log on to).
Result: If no one else logged on to the unit before you and if IP connectivity
exists to this unit, the User Authentication for Telnet Mode dialog box
displays. It is similar to the following:
2 Enter your logon name in the Login Name field. If you have not yet
customized this setting, refer to "Default logon ID and password" on page
157 for the default logon ID.
3 Enter your password in the Password field. If you have not yet customized
this setting, refer to "Default logon ID and password" on page 157 for the
default password.
4 Click on the OK button.
158
→
Remote Gateway 9150 Installation and Administration Guide
XXX.XXX.XXX.XXX (IP address
Standard 4.0