Saving Changes To Scripts - Nortel Meridian Meridian 1 Scripting Manual

Creating and administering scripts

Saving changes to scripts

You can make changes to a script while it is activated. You can then choose to
activate the script with the changes immediately, or you can save the script
without immediately implementing the changes. There are two ways to save a
script that is currently activated:
If you want to put the script into service immediately after making changes,
activate the script.
If you do not want to put the script into service immediately after making
changes, save the script using a different name.
When you activate a change to a script (under the existing name of the script),
calls in progress are processed using the old version of the script, and new calls
are processed using the new version of the script.
If the activation fails (because of a compilation error), the change to the script is
not saved. New calls still use the old version of the script.
Saving a change to a script
Follow these steps to save changes to a script.
For a new script:
To save the script using the current name, choose File > Save, type a
script name, and click OK.
For an existing, unactivated script:
To save the script using a new name, choose File > Save As. Type the
new name of the script, and click OK.
For a script in an edited or validated state:
Choose File > Save, and click OK.
156
Standard 8.04
Contact Center Manager