Remove From Nacd - Nortel Meridian Meridian 1 Scripting Manual

October 2007

REMOVE FROM NACD

Use the REMOVE FROM NACD command to remove a call from the ACD-DN
to which the call is queued. The call is then removed from all targets in the
NACD table for that ACD-DN.
Script syntax
REMOVE FROM NACD
Parameter
Enter information for the following parameter:
<acd_dn>
removed. This parameter must be a single ACD-DN or, if you use a
variable, it must be an ACD type variable.
Restrictions
The following restrictions apply to this command:
The REMOVE FROM NACD command cannot be the first command in a
voice script.
Do not use this command in the network script (if you purchased the NSBR
feature) or any of its subscripts.
Scripting Guide for Communication Server 1000/Meridian 1 PBX
<acd_dn>
The number of the ACD-DN from which you want the call
Networking commands
281