Multi-Function Tiller Handle Angle Adjustment - TOHATSU MFS 75A Owner's Manual

62
ADJUSTMENT
NOM01903-0
5. Multi-function tiller handle
angle adjustment
ENOW00985-0
Do not install or remove spacers on the
bracket with engine running.
Do not install more than 6 spacers [ 1 ].
The angle of the multi-function tiller han-
dle can be adjusted between 0 and 20
degrees by using the spacer kit that
comes with the multi-function tiller han-
dle.
1. Spacer [1]
9
2. Spacer [2]
3. Screw
WARNING
1
2
ENOF02550-1
ENOF02551-1
Angle of Multi-Function Tiller Handle
according to the number of spacers.
Spacer [1]
(Qty)
0
0
1
2
3
4
5
After adjusting the angle, fully turn the til-
ler handle to both side and check that
there is no problem in operation.
ENON00022-A
Notes
Tighten the screws securely.
Periodically make sure that the bolts
are not loose.
The multi-function tiller handle kit
includes 3 spacer [1], 1 spacer [2] and
screws.
3
Spacer [2]
Angle (approx)
(Qty)
0 0
1 0
1 3
1 7.5
1 12
1 16
1 20