40
ENGINE OPERATION
4. Set the throttle grip to START posi-
tion.
1. Throttle grip
5. Turn the main switch key to ON posi-
tion and confirm three warning lamps
light up with beep sound and then
lights out.
7
6. Turn the main switch key to the START
position and release it to start the
engine. The engine will crank continu-
ously until the engine starts.
ENON00942-0
Note
It takes maximum 4 seconds of the
continuous crank before the engine
starts.
If fail to start the engine, crank again
after 10 seconds or more.
1
ENOF00866-2
N
R
1
1. Main switch key
2. Warning lamp
7. Make sure that water is being dis-
charged from the cooling water check
port.
ENOM01807-0
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
F
2
ENOF00867-3A
ENOF02408-0