TOHATSU MFS 75A Owner's Manual page 65

Hide thumbs Also See for MFS 75A:
Table of Contents

Advertisement

Item
• Make sure that steering handle and remote control is
functioning normally.
Other parts
• Check the anode for corrosion and deformation.
ENOM01823-0
Oil level checking
If the oil level is low, or too high, the life
of the engine will be shortened signifi-
cantly.
1. Stop the engine and place the out-
board motor in a vertical position.
2. Turn the top cowl hook levers to
unlock, lift and remove the top cowl.
3. After the engine has been shut off 5
minutes, remove the dipstick and
wipe oil off with a clean cloth.
4. Insert the dipstick to the hole com-
pletely.
5. Remove the dipstick. Oil level must be
between the upper limit and lower
limit shown on the dipstick.
6. If the oil level is below the lower limit,
add the oil to between the upper and
lower limit mark on the dipstick.
1
3
1. Filler cap
2. Dipstick
3. Filler port
Points to Check
1. Upper limit 4200 mL (4.4/3.7 US/Imp qt.)
2. Lower limit 2200 mL (2.3/1.9 US/Imp. qt.)
ENON00024-0
Note
The oil level should be checked when the
engine is cooled.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears con-
taminated.
ENOM00082-A
Engine oil replenishing
ENOW00972-0
Do not add or mix different brands of
engine oil or grade with existing oil. In
case engine oil of other brand or grade is
added, drain all oil and ask dealer for
2
treatment.
In case other than engine oil such as gaso-
ENOF02407-0
line is put in the oil chamber, empty the
chamber and ask dealer for treatment.
When replenishing engine oil, be careful
not to allow entry of foreign matters such
as dust and water into oil chamber.
INSPECTION AND MAINTENANCE
Remedy
Repair if necessary
Replace
1
2
CAUTION
65
ENOF02432-0
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 90aMfs 100aMfs 115aMfs 140a

Table of Contents