Engine Operation; Before Starting; Fuel Feeding - TOHATSU MFS 75A Owner's Manual

ENGINE OPERATION

ENOM00042-0

Before starting

ENOM00246-0
Oil Level checking
Check the engine oil level before each
use. If the oil level is low or too high, the
life of the engine will be shortened sig-
nificantly. (To properly check the engine
oil level, follow the instructions,
page 65)
1
3
1. Oil filler cap
2. Dipstick
3. Filler port
1. Upper limit 4200 mL (4.4/3.7 US/Imp qt.)
2. Lower limit 2200 mL (2.3/1.9 US/Imp. qt.)
ENOM01804-0

1. Fuel feeding

ENOW00029-A
When opening fuel tank cap, be sure to fol-
low the procedure described below. Fuel
could blast out through the fuel tank cap in
case the cap is loosened by using another
see
procedure when internal pressure of fuel
tank is raised by heat from sources such as
sun light.
ENOW00947-0
When using a separate tank, be sure that the
fuel line is not kinked and is connected
securely.
1. Fully open the air vent screw on the
2
ENOF02407-0
1. Air vent screw
2. Fuel tank cap
1
2. Open the fuel tank cap slowly and
2
ENOF02432-0
3. Remove the cap from the fuel joint.
WARNING
CAUTION
fuel tank cap.
release internal pressure completely.
After that, close the fuel tank.
Connect the fuel hose of the primer
bulb and secure with a hose band.
37
7
1
2
ENOF00027-B