TOHATSU MFS 75A Owner's Manual page 82

82
INSPECTION AND MAINTENANCE
ENOM01827-0
Ground wire checking
The ground wires described below are
making electrically connect between
moving parts and sacrificial anodes to
prevent galvanic corrosion.
Inspect the wires and their terminals
periodically. If there is any damage,
replace the ground wire.
10
ENOM01824-0
Power Trim & Tilt fluid checking
ENOW00088-0
Be sure that outboard motor is secured to
transom or service stand, or accidental
drop or fall of outboard motor could lead
to severe personal injury.
Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
Do not go under outboard motor tilted up
and locked, or accidental fall of outboard
motor could lead to severe personal
injury.
ENOW00973-0
Do not unscrew the filler cap with the out-
board motor tilted down. Pressurized fluid in
ENOF02447-0
the reservoir tank may spurt out.
Check the fluid level in the reservoir tank
while the tank is kept in a vertical posi-
tion.
1. Tilt the outboard motor up and lock
the tilt with the tilt stopper.
2. Remove the fluid cap by turning
counter-clockwise, then check if the
fluid level reaches the bottom line of
the fill hole.
ENOF02448-0
1
1. Filler cap
2. Fluid level
WARNING
CAUTION
2
ENOF01340-A