Shallow Water Operation - TOHATSU MFS 75A Owner's Manual

56
ENGINE OPERATION
ENOM00068-A

9. Shallow water operation

ENOW00051-0
During shallow water operation, be careful
not to place your hand between the swivel
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOW00053-0
While in shallow water drive position, do not
operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-1A
7
Do not over tilt the outboard motor when
driving in shallow water, or air may be sucked
through water inlet, potentially leading to
engine overheating.
1. Water inlet
WARNING
CAUTION
CAUTION
1
ENOF01144-A
ENOM00069-A
Power Trim & Tilt type
1. Operate the Power Trim & Tilt switch
and tilt the outboard motor up into
desired shallow water running posi-
tion.
UP
DN
UP
DN
UP
DN
ENOF02437-0
ENOF00067-2
ENOF00941-0