Trim Tab Adjustment - TOHATSU MFS 75A Owner's Manual

Side mount type
2
1
1. Throttle friction adjustment screw
2. Decrease
3. Increase
Top mount type
2
3
1. Throttle friction adjustment screw
2. Lighter
3. Heavier
ENOM00076-0

4. Trim tab adjustment

ENOW00076-1
WARNING
Be sure that the outboard motor is
secured to transom or service stand, or
accidental drop or fall of outboard motor
could lead to severe personal injury.
Be sure to lock the outboard motor in the
tilt up position, or accidental fall of out-
board motor could lead to severe per-
sonal injury.
Do not go under outboard motor in the tilt
up position and locked, or accidental fall
3
ENOF00078-2
1
ENOF00942-0
of outboard motor could lead to severe
personal injury.
ENOW00075-1
WARNING
Inappropriate adjustment of trim tab could
cause steering difficulty. After installing or
readjusting trim tab, check if steering load is
even.
If straig ht - line cr uising cannot be
achieved, adjust the trim tab located
under the anti-ventilation plate.
If the boat veers toward the left, direct
the trim tab towards A (left from rear
of boat).
If the boat veers toward the right,
direct the trim tab towards B (right
from rear of boat).
1. Trim tab
ENON00022-A
Notes
After adjustment securely tighten the
trim tab fixing bolt.
Check for looseness of the bolt and the
trim tab at regular intervals.
61
ADJUSTMENT
9
1
ENOF02449-0