Periodic Inspection - TOHATSU MFS 75A Owner's Manual

70
INSPECTION AND MAINTENANCE
ENOM01106-1

2. Periodic Inspection

It is important to inspect and maintain your outboard motor regularly. Make sure to per-
form each service at interval specified in the chart below. Maintenance intervals are
determined by the number of hours outboard motor has been used or number of
months, whichever comes first.
Recode inspection performed in the INSPECTION & MAINTENANCE LOG at the back of
this manual.
Description
Fuel filter
High pressure
fuel filter
High pressure
fuel hose
Fuel System
Fuel tank
Fuel tank cap
Fuel pump
Fuel pressure
Hose
Spark plug
Ignition
System
Spark plug cap/
High tension cord
Starter motor
Starting
Battery/Cable
System
connection
10
Engine oil
Oil filter
Valve Clearance
Engine
Timing belt
Compression
pressure
Combustion
chamber
Thermostat
*" " This procedure can be performed by end user.
*" " This procedure shall be carried out by the dealer.
Inspection intervals
First 20 Every 50 Every 100 Every 200
hours or 1 hours or 3 hours or 6 hours or 1
month months months year
/
/ /
/ /
/ /
/ /
Replace Replace
Replace Replace
Every 400
Inspection procedure
hours or 2
year
Check and clean or Replace if
necessary. (See page 75)
Replace (Every 200 hours or 2
years)
Check / Replace if necessary
Check and clean (See
page 74)
Check/Replace if necessary.
Check/Replace if necessary.
Check
Check/Replace if necessary.
Check and clean. (See
page 78)
Check/Replace if necessary.
Check
Check
Replace. (See page 65)
Replace every 200 hrs or 1
years (See page 74)
Check and adjust
Check/Replace if necessary.
Check
Clean
Check / Replace if necessary
Remarks
0.8-0.9 mm
(0.031-0.035 in)
Approx 4200 mL
(4.44 US qt.)
with filter
replacement)