TOHATSU MFS 75A Owner's Manual page 52

52
ENGINE OPERATION
It is imperative that the trim angle is
adjusted correctly. Incorrect adjustment
will cause the boat to sway, deteriorate
engine performance and may cause
unsafe steering conditions.
ENOW00970-0
The power trim & tilt can be set to any trim
angle. However, do not use the tilt angle
range when cruising except shallow water
operation.It may ingest air into the water
cooling system, resulting in engine overheat-
ing.
7
1
1. Max.tilt angle : 63° from the vertical
2. Trim angle : -4 to 10°
3. Boat transom angle : -12°
ENOM01808-0
Proper trim angle
The trim angle is optimum when the boat
is parallel to the water surface while run-
ning.
CAUTION
3
2
0°
ENOF02446-0
1. Perpendicular to the water surface
ENOM01809-0
Improper trim angle (bow rises too
high)
When the trim angle is excessive, the bow
will rise out of the water and the speed
will be decrease. Furthermore, the bow
may sway or the bottom may slam the
water while running.
Decrease the trim angle by pressing
"DN"(Down) of power trim & tilt switch.
UP
DN
1
ENOF00051-1
ENOF00052-0
UP
DN
ENOF02437-0
ENOF00067-2