TOHATSU MFS 75A Owner's Manual page 33

Hide thumbs Also See for MFS 75A:
Table of Contents

Advertisement

ENOM00126-A
Remedy
1.
Reduce the speed to less than half
open throttle, and move to safe place
quickly, and stop the engine.
Check the propeller for bent or dam-
age on blades.
Consult an authorized dealer if engine
shows the same result even after
replacing propeller with a new one.
2.
Move to safe place quickly, and stop
the engine until it cools down.
Check the engine oil level, and add
engine oil if necessary.
Consult your dealer if the engine oil
level is too low or too high.
3.
Move to safe place quickly, and check
if cooling water is discharged from
the water check port at idle speed
and stop the engine.
Remove any foreign matter on the
gear case and propeller if necessary.
Consult an authorized dealer if no
discharge of cooling water.
4.
Consult an authorized dealer.
5.
Replace the engine oil (See page 72)
and reset the indicator (See page 35).
PRE-OPERATING PREPARATIONS
33
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 90aMfs 100aMfs 115aMfs 140a

Table of Contents