Steering; Trim Angle - TOHATSU MFS 75A Owner's Manual

ENOM00920-0

6. Steering

ENOW00870-1
WARNING
Sudden steering may cause passenger(s) to
be thrown overboard or fall.
Tiller handle type
Right turn
Move the tiller handle to the left
Left turn
Move the tiller handle to the right.
Remote control type
Right turn
Turn the steering wheel to the right.
Left turn
Turn the steering wheel to the left.
ENOM01815-0

7. Trim angle

ENOW00043-1
Adjust the trim angle when the engine is
stopped.
Do not put hand or finger in between out-
board motor body and clamp bracket
when adjusting trim angle to prevent pos-
sible injury.
Unsuitable trim position can cause loss of
control of boat. When testing a trim posi-
tion, run the boat slowly initially to see if
it can be controlled safely.
ENOW00044-1
Excessive trim up or down may cause unsta-
ble boat operation, loss of control that may
leads to accident during cruising.
For manual tilt model, If you feel the trim
is improperly positioned, stop the boat
and readjust trim angle before continuing
to cruise.
ENOF00892-0
For outboard motor model with PT or PTT
switch on the bottom cowl, do not oper-
ate the switch during while cruising, or
control of boat may be lost.
The trim angle of the outboard motor can
be adjusted to suit the transom angle of
the hull, and load conditions. Choose an
appropriate trim angle that will allow the
anti-ventilation plate to run parallel to
the water surface during operation.
ENOM01817-0
Power Trim & Tilt type
The provided power trim & tilt can be
adjusted to set the desired trim angle of
the outboard motor according to the
ENOF00893-0
transom shape, planing speeds and load.
ENGINE OPERATION
WARNING
WARNING
51
7