Shallow Water Operation - TOHATSU M40D2 Owner's Manual

56
ENGINE OPERATION
ENOM00068-A

10.Shallow water operation

ENOW00051-0
During shallow water operation, be careful
not to place your hand between the swivel
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOW00053-0
While in shallow water drive position, do not
operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-1
7
Do not over tilt the outboard motor when
driving in shallow water, or air may be sucked
through water inlet and sub-water inlet,
potentially leading to engine overheating.
2
1. Water inlet
2. Sub-water inlet
WARNING
CAUTION
CAUTION
1
ENOF01144-0
Manual tilt type
1. Shallow water running position:
Put the reverse lock lever in the tilt up
position, and tilt up the outboard
motor to put the outboard motor in
the shallow water running position.
1
2
3
1. Reverse lock lever
2. Tilt down position
3. Tilt up position
2. Return to normal running position:
Put the reverse lock lever in the tilt
down position, slightly lift up the out-
board motor, and then put it down.
1
2
3
1. Reverse lock lever
2. Tilt down position
3. Tilt up position
ENOF00059-0
ENOF00059-0