40
ENGINE OPERATION
Tilt up
With the shift lever in Neutral or Forward,
fully tilt the motor up toward you by hold-
ing the tilt handle provide at the rear of
the top cowl. Then slightly lower the
motor for locking in the up position.
7
1. Tilt lever
2. Tilt up position
3. Shallow water operation lever
ENOM00063-A
Tilt down
Slightly tilt the motor up, and pull the tilt
lever toward you to release the tilt-lock.
Then lower the motor slowly.
1. Tilt lever
ENOM00068-A
9. Shallow water operation
ENOW00051-0
ENOF02230-0
During shallow water operation, be careful
not to place your hand between the swivel
1
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOW00053-0
2
While in shallow water drive position, do not
3
operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
ENOF00544-A
and keep the cooling water intake sub-
merged.
1
ENOF00545-A
WARNING
CAUTION