ProSoft Technology inRAX MVI56E-MNETCR User Manual page 85

MVI56E-MNETCR ♦ ControlLogix Platform
Modbus TCP/IP Multi Client Enhanced Communications Module for Remote Chassis
Click the S
1
In the Connection Setup dialog box, click the T
2
verify if the module is accessible with the current settings.
You can also use CIPconnect
ENBT card.
Refer to Using CIPconnect to Connect to the Module (page 63, page 22) for
information on how to construct a CIP path.
ProSoft Technology, Inc.
June 14, 2011
button to browse for the module's IP address.
U C
ET P ONNECTION
®
to connect to the module through a 1756-
Diagnostics and Troubleshooting
button to
C
EST ONNECTION
User Manual
Page 85 of 159