ProSoft Technology inRAX MVI56E-MNETCR User Manual page 115

MVI56E-MNETCR ♦ ControlLogix Platform
Modbus TCP/IP Multi Client Enhanced Communications Module for Remote Chassis
Command List Entry Errors
Code
-40
-41
-42
-43
-44
-45
-46
-47
-48
Note: When the Client gets error -47 or -48, it uses the adjustable ARP Timeout parameter in the
configuration file to set an amount of time to wait before trying again to connect to this non-existent
server. This feature allows the Client to continue sending commands and polling other existing
servers, while waiting for the non-existent server to appear on the network.
ProSoft Technology, Inc.
June 14, 2011
Description
Too few parameters
Invalid enable code
Internal address > maximum address
Invalid node address (<0 or >255)
Count parameter set to 0
Invalid function code
Invalid swap code
ARP could not resolve MAC from IP (bad IP address, not part of a
network, invalid parameter to ARP routine).
Error during ARP operation: the response to the ARP request did
not arrive to the module after a user-adjustable ARP Timeout.
Reference
User Manual
Page 115 of 159