Writing The Ethernet Settings To The Module - ProSoft Technology inRAX MVI56E-MNETCR User Manual

MVI56E-MNETCR ♦ ControlLogix Platform
Modbus TCP/IP Multi Client Enhanced Communications Module for Remote Chassis

5.6.5 Writing the Ethernet Settings to the Module

Expand the MVI56EMNETCRETHERNET controller tag.
Set the new Ethernet configuration in MVI56EMNETCRETHERNET.C
Move a value of 1 to MVI56EMNETCRETHERNET.W
After the message is executed, the MVI56EMNETCRETHERNET.W
resets to 0.
To check the status of the message, refer to the WRITEETHERNETMSG tag.
ProSoft Technology, Inc.
June 14, 2011
ONFIG
RITE
bit
RITE
Page 139 of 159
Reference
User Manual