Affixing A Label To A Power Cord - H3C CR16000-M Installation Manual

FigureA-4 Affixing a label
Stick side
FigureA-5 shows the affixed labels when the cable is laid vertically and horizontally.
FigureA-5 Affixed labels
TO :
B0 2

Affixing a label to a power cord

Stick the label to the recessed rectangular area on the identification plate. You can stick the label to
either side of the identification plate. Be sure to affix the labels on the same side of the identification
plates.
A cable tie is bundled 2 cm (0.79 in) away from the connector. You can affix the label to other
positions as needed.
1
4
0 3 1 2
FigureA-6 shows how to affix a label when a cable is laid horizontally.
2
TO:
B02 03
5
4
3
12