H3C CR16000-M Installation Manual page 103

FigureB-27 Aligning the connector with the fiber port
3. Pinch the part of the connector marked with PUSH, and insert the connector into the port until
you hear a click.
Slightly pull the fiber and make sure the fiber is connected securely.
FigureB-28 Inserting the connector
Disconnecting an LC-type connector
Pinch the part of the connector marked with PULL to disengage the connector from the port, and
then slightly pull the connector out.
FigureB-29 Disconnecting the connector
Cleaning a fiber connector
To clean a fiber connector without guide pins:
1. Dip a lint-free cotton cloth in alcohol, spin the cloth dry, and clean the end surface and
cylindrical surface of the connector ceramic pins.
14