Affixing A Generic Label - H3C CR16000-M Installation Manual

FigureA-6 Affixing a label
TO:
B03 -48V2
Bind cable ties on both ends of a cable. After the bundling, the finished identification plate should be
on top of the cable in horizontal cabling, or on the right side of the cable in vertical cabling. Make sure
the label is facing out, as shown in FigureA-7.
FigureA-7 Affixed labels

Affixing a generic label

The requirements for affixing a generic label are the same as affixing a label on a signal cable. For
more information, see
FigureA-8.
"Affixing a label to a signal
5
TO :
–
B0 3
4 8 V 2
cable." For the example of affixed labels, see