Repackaging The Router Chassis; Removing The Chassis From The Rack - H3C CR16000-M Installation Manual

For information about how to remove a card and install a filler panel, see "Replacing a fabric
module."
5. Put the cards into anti-static bags.
6. Put the packed card into the box, and tape the flaps of the box with packing tape. Place the card
in a correct direction onto the foam cushion in the box; otherwise, the power module cannot be
completely seated into the foam cushion.

Repackaging the router chassis

Removing the chassis from the rack

The router is heavy. If possible, use a mechanical lift to move the router.
To remove the chassis from the rack:
1. Prepare the cardboard box and packing bag of the chassis. Make sure the box and bag are
clean, dry, and not damaged.
2. Use a Phillips screwdriver to loosen the screws that attach the mounting brackets to the rack.
Figure12-3 Removing the screws that secure the mounting brackets
3. Use a minimum of four people to slide the chassis outwards along the slide rails. When most
part of the chassis is removed from the slide rails, lift up the chassis by holding the handles at
the chassis sides to completely remove the chassis from the rack.
12-4