Repackaging The Router Chassis - H3C CR16000-M Installation Manual

Figure12-4 Removing the chassis from the rack
4. Place the chassis a convenient place for handling.

Repackaging the router chassis

1. Put the foam cushion into the paper frame.
2. Place the chassis into the foam cushion and secure the chassis.
3. Cover the chassis with the packing bag.
4. Cover the foam cushion to the chassis top, and make sure the mounting brackets seat into the
internal notches of the foam cushion.
5. Erect one paper angle bead along each vertical edge of the chassis. Put the accessories box in
the notch in the top middle of the foam cushion, and cover the top cap to the cardboard box.
12-5