H3C CR16000-M Installation Manual page 102

FigureB-24 Aligning the connector with the fiber port
3. Insert the connector into the port until you hear a click.
Slightly pull the fiber and make sure the fiber is connected securely.
FigureB-25 Inserting the connector
Disconnecting an LC-type connector
Press the locking tab to disengage the connector from the port, and then slightly pull the connector
out.
FigureB-26 Disconnecting the connector
Connecting or disconnecting an MPO-type fiber connector
Connecting an MPO-type connector
1. Remove the dust-proof cap and keep the cap for future use.
2. Align the connector with the fiber port.
1
2
13