Connecting Or Disconnecting A Ring Terminal - H3C CR16000-M Installation Manual

•
Cover unused fiber connectors with dust-proof caps. Remove the dust-proof caps only when
you are about to use the fiber connectors.

Connecting or disconnecting a ring terminal

CAUTION:
• Ring terminals might rotate. Make sure a ring terminal cannot contact any adjacent metal
structural parts or studs.
• As a best practice, do not connect two ring terminals to one stud.
Connecting a ring terminal
1. Align the ring terminal with the stud, and fasten the hexagonal nut clockwise.
FigureB-18 Connecting a ring terminal
NOTE:
You can attach a ring terminal with in direction A or B as shown in FigureB-19. As a best
practice, use direction A.
FigureB-19 Ring terminal installation directions
A
2. Slightly pull the cable and make sure the cable is securely connected.
2
1
B
10