TUONO R_FACTORY
•
Hold the throttle unit firmly, and with
short alternating movements, lift and
slide it off the intake flange.
•
Fit the complete throttle unit together
with the fuel tank on a clean surface.
PAY SPECIAL ATTENTION WHEN REMOVING THE
THROTTLE UNIT SINCE IT REMAINS CONNECTED TO THE
FUEL TANK THROUGH THE FUEL PIPE.
Checking the throttle body
•
Unscrew and remove the M8x1 nut (1)
and remove the spring washer.
•
Turn the throttle valve control lever (2)
slightly, unscrew and remove the three
TE screws. M5x12 (3).
•
Remove the complete fixing bracket
(4) from the throttle grip cables with the
two bushings (5) and the torsion spring
(6) from the throttle body unit.
Power supply
P SUPP - 201