APRILIA TUONO R FACTORY 2007 Service Station Manual page 222

Suspensions
TURN THE SET SCREWS (1 - 2) GRADUALLY BY 1/8 OF A
TURN AT A TIME.
SPORT SETTINGS MAY BE USED ONLY FOR OFFICIAL
COMPETITIONS TO BE CARRIED OUT ON TRACKS,
AWAY FROM NORMAL ROAD TRAFFIC AND WITH THE
AUTHORISATION OF THE RELEVANT AUTHORITIES.
Specification
Rebound damping adjustment, screw (1)
Compression damping adjustment, screw (2)
Spring preloading, nut (3)
Stems (A) protrusion from top plate (excluding cover)
OHLINS FORK
Standard front fork setting is adjusted to suit most
high and low speed riding conditions, whether the
vehicle is partially or fully loaded.
However, this set can be modified for specific
needs according to vehicle use.
NOTE
TO COUNT THE NUMBER OF CLICKS AND/OR TURNS OF
THE SET SCREWS (1-2) ALWAYS START FROM THE
MOST RIGID SETTING (SET SCREW FULLY CLOCKWISE).
USE THE SET SCREWS (1-2) AS REFERENCES FOR AD-
JUSTING THE HYDRAULIC COMPRESSION / REBOUND
DAMPING.
GRADUALLY TURN THE SET SCREWS (1 -2) ONE NOTCH
AT A TIME.
Specification
Rebound damping adjustment, screw (1)
Compression damping adjustment, screw (2)
Spring preloading, nut (3)
Stems (A) protrusion from top plate (excluding cover)
SUSP - 222
S
TANDARD FORK ADJUSTMENT
open 1.5 turns (anticlockwise) from fully closed (clockwise)
open 1 turn (anticlockwise) from fully closed (clockwise)
open 5 protrusion notches (anticlockwise) from fully closed
(for this type of adjustment, take your vehicle only to an official
OHLINS
FORK ADJUSTMENT
loosen 12 clicks (anticlockwise) from fully closed (clockwise)
open 12 clicks (anticlockwise) from fully closed (clockwise)
loosen 8 turns (clockwise) from fully open (anticlockwise)
(for this type of adjustment, take your vehicle only to an official
TUONO R_FACTORY
Desc./Quantity
(clockwise)
aprilia dealer)
1 protrusion notch
Desc./Quantity
aprilia dealer)
4 protrusion notches