Suspensions
•
Place the sleeve in the vice using the
specified tool.
•
Screw the upper cover, tightening it to
the prescribed torque.
Specific tooling
AP8140149 Protection for fitting operations
Steering bearing
Adjusting play
Steering bearings and steering clearance:
•
Place the vehicle on the specific cen-
tral service stand.
•
Shake the fork in the riding direction.
•
Adjust if clearance is detected.
•
Unscrew and remove the U-bolt four
fixing screws.
•
Remove the U-bolt.
•
Remove the handlebar and place it
paying attention that oil in the clutch
and front brake tanks does not spill out.
•
Unscrew and remove the top bolt on
the headstock and retrieve the washer.
SUSP - 236
TUONO R_FACTORY