APRILIA TUONO R FACTORY 2007 Service Station Manual page 230

Suspensions
Oil level: 114 mm (4,49 in) from the upper lining
edge in a completely compressed position
without spring or washer underneath (fork with
connections for standard GRIP/CALIPER/
CLAMP).
Oil level: 122 mm (4,80 in) from the upper lining
edge in a completely compressed position
without spring (fork connections for radial cal-
ipers).
THE SLEEVE MUST BE PERFECTLY UPRIGHT IN ORDER
TO MEASURE THE CORRECT OIL LEVEL. THE OIL LEVEL
MUST BE THE SAME IN BOTH STANCHIONS.
Characteristic
Oil for R fork
Oil quantity for standard fork (R version)
523 ± 2.5 cc (31.92 ± 0.15 cu in) (for each stem)
Oil quantity for R fork with radial mountings (R version)
505 ± 2.5 cc (30.82 ± 0.15 cu in) (for each stem)
Reassembling the fork
•
Lock the stem in a vice without dam-
aging the surface.
•
Protect the bearing tube end with ad-
hesive tape.
•
Lubricate the sliding edges with fork oil
or sealing grease.
•
Fit on the slider the dust scraper, the
retainer ring and the seal ring.
SUSP - 230
TUONO R_FACTORY