APRILIA TUONO R FACTORY 2007 Service Station Manual page 141

TUONO R_FACTORY
•
Remove the head cylinder unit.
•
Unscrew and remove the four shoulder
screws joining the head to the cylinder.
•
Separate the cylinder from the head.
•
Collect the gasket.
See also
Removing the
cylinder
Cylinder head
Removing the overhead camshaft
•
Remove the balancing countershaft
(only for the rear head).
•
Unscrew the eight U-bolt screws fixing
the camshafts.
•
Remove the U-bolt.
•
Remove the camshafts.
See also
Removing the
cylinder head
Removing the balancing counter shaft
Removing the balancing counter shaft
•
Remove the rear head.
Engine
ENG - 141