APRILIA TUONO R FACTORY 2007 Service Station Manual page 139

TUONO R_FACTORY
•
Screw the fixing nut according to the
procedure described.
•
Remove clutch locking tool.
•
Unscrew the crankshaft locking tool.
Specific tooling
0277881 Clutch locking tool
0240880 Threaded bolt for locking crankshaft
at TDC
•
Lubricate and insert the clutch discs on
the bell.
•
The first disc has a reference mark on
the outside diameter.
•
Insert a coated disc and a steel disc al-
ternately.
•
The upper coated disc must be inser-
ted on the offset groove.
•
Lubricate the clutch disengaging shaft
and insert it in the main shaft hole.
•
Fit the clutch plate.
•
Insert the clutch spring and tighten the
screws to the prescribed torque.
Engine
ENG - 139