TUONO R_FACTORY
•
Working on the left side, screw the nut
on the upper screw (1).
•
Free the vehicle from the belt and the
hoist.
Linkages
Removing
•
Working from the right side of the ve-
hicle, loosen and remove the nut (1).
•
Slide off the screw (2) from the oppo-
site side.
•
Loosen and remove the nut (3).
•
Slide off the screw (4) from the oppo-
site side.
•
Loosen and remove the nut (5).
•
Slide off the screw (6) from the oppo-
site side.
•
Remove the complete suspension
connecting rod assembly unit (7).
CAUTION
UPON REFITTING, GREASE THE FULCRUM POINTS ON
THE CONNECTING ROD ASSEMBLY. PAY SPECIAL AT-
TENTION TO THE CORRECT POSITIONING OF THE
PARTS AND CHECK SEVERAL TIMES THAT JOINTS
MOVE SMOOTHLY.
Suspensions
SUSP - 251