APRILIA TUONO R FACTORY 2007 Service Station Manual page 241

TUONO R_FACTORY
•
Tap the wheel axle slightly to extract
the head from its seat.
•
Make the wheel move forward and re-
lease the gearing chain from the
sprocket.
•
Remove the wheel spindle together
with the right hand chain tensioner
skid.
•
Remove the wheel by freeing the disc
from the brake calliper.
•
Holding the outer rim of the sprocket with both hands, slide off the final transmission unit by
pulling it parallel to the wheel axis.
OPERATE WITH CAUTION. IF THE FINAL TRANSMISSION UNIT IS INSTALLED ON THE ANTI-
VIBRATION BUFFER HOLDER, DO NOT TURN OVER O ROTATE THE REAR WHEEL SPROCKET
SIDE HORIZONTALLY, OR THE FINAL TRANSMISSION UNIT COULD SLIDE OUT AND FALL,
AND THE SPROCKET MAY GET DAMAGED.
CAUTION
DO NOT UNSCREW THE FIVE NUTS. THE FINAL TRANSMISSION UNIT CAN BE SLID OFF COM-
PLETELY FROM THE ANTI-VIBRATION BUFFER HOLDER.
•
Remove the final transmission unit.
CAUTION
THE FLEXIBLE COUPLINGS REMAIN FITTED ON THEIR
HOLDER.
Suspensions
SUSP - 241