APRILIA TUONO R FACTORY 2007 Service Station Manual page 167

TUONO R_FACTORY
FRONT CYLINDER
•
Remove the crankshaft locking tool.
•
Turn the crankshaft 300° anticlockwise
so that the front cylinder piston reaches
the top dead centre in the combustion
phase.
•
Align the reference on the intermediate
gear with that on the flange.
•
Align the camshafts with the specific
tool which is inserted on the eccentrics.
Specific tooling
8140205 Camshaft template tool
Engine
ENG - 167