TUONO R_FACTORY
•
Fit the oil pipes on the engine crank-
case and secure them with new
clamps.
•
Remove the protection present on the pipes.
•
Fit the throttle body.
•
Screw the clamps on the inlet manifolds.
•
Attach the connectors on the injectors.
•
Insert the suction pipes to the throttle valve.
•
Reattach the throttle potentiometer connection.
•
Fit the throttle grip cables and adjust their clearance.
•
Connect the wiring to the ignition coils.
•
Position the airbox.
•
Reattach the manifold pressure sensor connection and the related pipes coming from the
throttle body.
•
Connect the oil vapour recovery pipe.
Engine from vehicle
ENG VE - 97