Exposure Settings - JAI GO-5000M-PMCL-UV User Manual

GO-5000M-PMCL-UV User Manual (Ver. 1.1)

Exposure Settings

This section describes how to set the exposure settings.
Command Name
Off
Exposure Mode
Timed
Trigger Width
Exposure Time 10 ~ Max. Exposure time[us]
Raw 10 ~ Max. exposure time
Exposure Time
[us]
Off
Exposure Auto
Continuous
Exposure Mode
The exposure mode set the way of the exposure. There are three ways.
Exposure Mode
Setting
OFF
Timed
Trigger Width
If Exposure Mode is set at Timed, the exposure operation can be selected as follows by setting Trigger
Option.
Trigger Option Setting
OFF
RCT
Parameter
No exposure control (free-running operation)
Exposure operation at the value set in Exposure Time. Setting value is usec unit.
If Trigger Mode setting is OFF, the camera is in free-running operation.
l
If Trigger Mode setting is ON, the exposure operation depends on the setting of
l
Trigger Option.
The exposure is controlled by the pulse width of the external trigger.
Trigger Mode is forced to ON.
l
Shutter control is not available.
The exposure time depends on the frame rate.
The exposure is set by ExposureTime.
The exposure is controlled by the input trigger pulse
width.
Exposure time(float)
Exposure time(integer)
Disable the exposure auto
Enable the exposure auto
Exposure Operation
Exposure Operation
Timed (EPS) mode
RCT mode
- 70 -
Main Functions
Description