JAI GO-5000M-PMCL-UV User Manual page 30

GO-5000M-PMCL-UV User Manual (Ver. 1.1)
Line Mode
Indicates the status of the item selected in Line Selector. (INPUT or OUTPUT)
Line Inverter
Inverts the signal polarity for the item selected in Line Selector. (False=Positive, True=Negative)
Line Status
Indicates the status of the selected signal (input or output) (True=High, False=Low)
Line Format
Indicates the interface information of the input and output lines (Not connected, TTL, LVDS or Opto-
coupled)
Note: In the GO-5000M-PMCL-UV, Opto-coupled interface is not available.
GPIO
GPIO is a general interface for input and output which controls the I/O for trigger signals and other
valid signals and pulse generators. By using this interface, you can control an external light source,
make a delay function for an external trigger signal, or make a precise exposure setting together with a
PWC trigger.
- 30 -
Main Functions