Table of Contents
Advertisement
GO-5000M-PMCL-UV User Manual (Ver. 1.1)
Specifications
Blemish Comp.
ALC
Gamma
LUT
Shading Compensation (Note1)
HDR
Power supply
Lens mount
Flange back
Optical filter
Operating temperature/Humidity Performance
guaranteed
Storage Temp. / Humidity
Regulation
Housing Dimensions
Weight
Notes:
Note1) In 1X3-1Y type, if the width is set not to the multiple of 24, 1 or 2 pixels may not
l
contain video data.
Note 2) Performance guarantee is up to 1 second.
l
Note 3) Gaps in histogram may occur if more than +12dB of gain is applied.
l
Note 4) Approximately 5 minutes pre-heating is required to achieve these specifications.
l
Note 5) The above specifications are subject to change without notice.
l
Detect white blemish above the threshold value (Black
Detection
blemish is detected only by factory)
Complement by adjacent pixels (Continuous blemishes are
Compensation
not compensated)
Numbers
Up to 512 pixels
AGC and Auto Shutter can be combined and automatically controlled
γ=0.45, 0.6, 1.0 (3 steps are available)
OFF: γ=1.0, ON=32 points can be set
Flat field Block based (20 x 16 blocks)
4 settings, Level 1, 2, 3 and 4
Input range
DC+12V ± 1V (Complies with PoCL Standards)
Current
250mA ± 20mA (12V input, full image)
Power Consumption
3.0W (12V input, full image)
C mount, Rear protrusion of the lens is less than 10 mm.
17.526 mm, Tolerance: 0 to -0.05 mm
Protection glass: Not provided
-5°C to +45°C / 20 to 80% (No-condensing)
-25°C to +60°C / 20 to 80% (No-condensing)
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE
29 x 29 x 52 mm (W x H x D) (excluding protrusion)
46g
- 99 -
Description
Miscellaneous
Advertisement
Table of Contents
