Sequence Mode - JAI GO-5000M-PMCL-UV User Manual

GO-5000M-PMCL-UV User Manual (Ver. 1.1)

Sequence Mode

This is a function to capture images in sequence based on preset ROI, Exposure Time, Gain and other
parameters in the sequence index table. To use sequence mode, Video Send Mode must be set to
"Command Sequence." In the GO-5000M-PMCL-UV, this is the only sequence mode available.
Video Send Mode
Command Select the index directly by setting the index number with the Command Sequence Index
Sequence command.
Basic setting to use this function
Trigger Mode: ON
l
Exposure mode: Timed
l
Video Send Mode: Command Sequence
l
Trigger Mode
Sequence mode
Notes:
The minimum trigger interval assumes that the exposure time is the same for each index in
l
the sequence. If the exposure time is different, the difference in period should be added to
the interval calculation.
If it is necessary to use different exposure times, it is recommended to arrange the exposure
l
times from the shortest to the longest.
In sequence mode, the exposure should be adjusted so that the operation is not in LVAL
l
sync accumulation.
Minimum Trigger Interval (1x8–1Y)
Readout Mode
Full
AOI Center 2/3
AOI Center 1/2
AOI Center 1/4
AOI Center 1/8
V Binning ON (Full)
How to Select Index
Time (Min. Trigger Period)
9435us + Exposure time + 8.01μs
6281us + Exposure time + 8.01μs
4740us + Exposure time + 8.01μs
2393us + Exposure time + 8.01μs
1219us + Exposure time + 8.01μs
4740us+ Exposure time + 8.01μs
- 80 -
Main Functions