JAI GO-5000M-PMCL-UV User Manual page 88

GO-5000M-PMCL-UV User Manual (Ver. 1.1)
Gain Raw
The range for adjustment: Gain Raw Digital All: 100 ~ 1600 (0dB ~ 24dB)
This provides automatic control of the gain level.
Gain Auto
This provides automatic control of the gain level. This is controlled by the command JAI ALC
Reference.
OFF: Adjust manually.
l
Continuous: Operate the auto gain continuously
l
The following detailed settings are also available.
ALC Speed: The rate of adjustment of GainAuto can be set (common with Exposure Auto)
l
Gain Auto Max: The maximum value of GainAuto control range can be set
l
Gain Auto Min: The minimum value of GainAuto control range can be set
l
ALC Reference: The reference level of Gain Auto control can be set (common with Exposure
l
Auto)
ALC Area Selector: The measurement area of GainAuto control can be set. (Common with
l
Exposure Auto)
ALC Area Enable: Determine the use of selected ALC area. This can enable its use area by
l
area. If ALC Area Enable All is set to "True", all areas are enabled. In this case, the setting area
by area is disabled.
ALC Channel Area
- 88 -
Main Functions