Figure 1-4 Lan Network Restart Pop-Up - Keysight N1911A Installation Manual

1 Getting Started
4 Press
5 Press
Figure 1-4
6 Press
7 If you intend to program over LAN or use such programs, make sure you have
8 Use the Connection Expert utility of the IO Libraries Suite to add the power
If you have installed other I/O software, refer to documentation that
NOTE
accompanies the software.
9 You can use various programming environments to control the power meter.
28
Network DHCP
Restart Network
A pop-up appears for 5 seconds (see
bottom of the display to see when the server has assigned an address.
LAN network restart pop-up
, to return to a measurement screen.
installed I/O software on your computer.
meter and verify a connection. When identifying the instrument, it is easiest to
use the IP address that you noted in step 6 above.
For an overview about programming instruments via LAN, refer to the
connectivity guide.
if you need to set any optional settings.
.
Figure
Keysight N1911A and N1912A Installation Guide
1-4). Monitor the Status at the