Keysight EPM Series Installation Manual page 32

1 Getting Started
These keys and connectors are associated with the measurement channels and
are located on the right-hand side of the front panel.
Key
32
Function
The arrow keys are used to highlight measurement setups and change parameters
such as instrument state names. The user's guide shows how these keys are used
in more detail.
Press this key to check the highlighted parameter On/ Off or select the
highlighted field. Refer to the user's guide for more information.
Press this key to access the zero and calibration menus. Refer to the user's guide
for more information.
Press this key to reset the MAX HOLD and MIN HOLD measurement. Refer to the
user's guide for more information.
Press these keys to enter numeric values in the pop-up fields, for example, the
offset values. To complete the entry use the softkey. Refer to the user's guide for
more information.
Keysight N1913/1914A Installation Guide