Huawei FusionPower6000 Maintenance Manual page 120

FusionPower6000
Maintenance Guide
1.
2.
3.
Step 2 Choose Monitoring > Power Distribution, click the corresponding compensation
cabinet, and set relevant parameters on the Running Parameters tab page.
----End
Issue 02 (2022-07-18)
Log in to the ECC800-Pro WebUI as an administrator.
Add a compensation cabinet.
Table 7-14 Adding a compensation cabinet
Path Parameter
Choose Device
System Attribute
Settings >
Device Type
Device
Managemen
t and click
Add Device.
The
parameters
for adding
devices are
displayed.
Connect To
Communicati
ons Port
Device
Address
Click Test Connect to check whether the compensation cabinet is properly
connected to the ECC800-Pro.
– If the connection succeeds, click Confirm. The connected devices are
displayed in the Number of connected devices list.
– If the connection fails, check whether the device is properly connected to
the ECC800-Pro, whether the device and ECC800-Pro are running
properly, and whether the parameter settings are consistent with the
device parameters.
NO TE
Ensure that Detail model is correctly set. Otherwise, the FusionPower6000 layout in the
app and management system will be affected.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Setting
Select PDU from the drop-down list box.
Select SVG-APF-NOVTIUM, SVG-In-Power,
or PDU-Sinexcel-svg100 from the drop-
down list box.
– If the compensation modules are from
Novtium, select SVG-APF-NOVTIUM.
– If the compensation modules are from
In-Power, select SVG-In-Power.
– If the compensation modules are from
Sinexcel, select PDU-Sinexcel-svg100.
Select System-Device name from the drop-
down list box.
Select COM3 from the drop-down list box.
In this example, Communications Port is
set to COM3. During actual configuration,
set the communications port based on the
actual situation.
In this example, Device Address is set to 1.
During configuration, set the actual device
address.
7 FAQ
113