Replacing A Psu For The Ecc800-Pro And Centralized Monitoring Module - Huawei FusionPower6000 Maintenance Manual

FusionPower6000
Maintenance Guide
Step 7 (Optional) Install the removed SIM card in the corresponding slot of the new
ECC800-Pro main control module.
Figure 6-2 Installing a SIM card
Step 8 Install the new ECC800-Pro main control module, and reinstall the cables, WiFi
module, and antenna.
Step 9 Choose Maintenance > Configuration File and import the backup configuration
file, or set parameters for the devices that connect to the ECC800-Pro to ensure
normal communication. Edit the plan view and add devices.
----End
6.3 Replacing a PSU for the ECC800-Pro and
Centralized Monitoring Module
Prerequisites
Do not touch the terminals in the rear of a removed PSU to avoid electric shocks.
●
●
Procedure
Step 1 Push the locking latch on the PSU leftwards, and pull the handle outwards to
remove the PSU from the subrack.
Issue 02 (2022-07-18)
D ANGER
Tool: insulated gloves
Material: a new and intact PSU of the same model
NO TE
● The central monitoring module has only one PSU. Remove the PSU quickly to reduce
data loss.
● The ECC800-Pro hash two PSUs. If both PSUs need to be replaced, replace them one by
one without powering off the ECC800-Pro.
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Component Replacement
44