Authenticating The Initial Startup Password - Huawei FusionPower6000 Maintenance Manual

FusionPower6000
Maintenance Guide

7.8.2 Authenticating the Initial Startup Password

Context
●
●
●
Procedure
Step 1 Authenticate the startup password on the WebUI.
1.
2.
3.
Step 2 Use the Service Expert app to authenticate the startup password.
1.
Issue 02 (2022-07-18)
The initial startup password authentication is required only during initial
power-on commissioning. If the authentication has been performed
successfully, no authentication is required afterward.
The startup password needs to be authenticated again when you switch the
system type, restore the default settings, and restore the factory settings on
the WebUI or by pressing keys.
If the startup password authentication is not complete, the ECC800-Pro
WebUI and app cannot be used for commissioning.
Log in to the ECC800-Pro WebUI as an administrator.
Record the values of Barcode and Verify Code in the displayed Startup
Password dialog box.
Within 24 hours, inform the technical support of Barcode and Verify Code to
obtain the password. After obtaining the password, enter the password in the
Password text box and click Submit to complete the authentication of the
startup password.
NO TE
The verification code is valid for 24 hours by default. After the validity period, the
verification code is automatically updated. You can also click to update the verification
code.
Hold down the SW button on the ECC800-Pro for 1s to enable the WiFi
function.
Figure 7-17 Button position
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 FAQ
94