Huawei FusionPower6000 Maintenance Manual page 112

FusionPower6000
Maintenance Guide
Step 3 Set management system communications parameters and authentication
password on the ECC800-Pro WebUI.
Table 7-9 Management system parameters (IPv4)
Path
System Settings
> NMS
Application >
NetEco >
Communication
Parameters
Issue 02 (2022-07-18)
Table 7-8 Mobile data
Path
Choose System
Settings >
System
Parameters >
Mobile Data.
NO TE
The address type of management system parameters can be IPv4 or domain name.
● If the address type is set to IPv4, refer to
● If the address type is set to the domain name, refer to
Parameter
Server IP
Standby server IP
NOTE
This parameter is
displayed when
Enable standby
server IP next to
Server IP is
selected.
Port number
Copyright © Huawei Digital Power Technologies Co., Ltd.
Parameter Default Value
Mobile data Disable
control
Table
Default Value
192.168.8.11
192.168.0.1
31220
Setting
Set this
parameter to
Enable and click
Submit.
7-9.
Table 7-10.
Setting
IP address of the
primary
management
system server
NOTE
The management
system IP address
and the ECC800-
Pro IP address
must be
configured in the
same network to
ensure normal
connection
between the
management
system and the
ECC800-Pro.
Set this parameter
to the IP address
of the backup
management
system server.
31220
7 FAQ
105