Huawei FusionPower6000 Maintenance Manual page 105

FusionPower6000
Maintenance Guide
Step Operation
Adding an
ATS
Adding a
compensati
on cabinet
Issue 02 (2022-07-18)
Parameter
Connect To
Communicati
ons Port
Device
Address
Device
Attribute
Device Type
Connect To
Communicati
ons Port
Device
Address
Device
Attribute
Copyright © Huawei Digital Power Technologies Co., Ltd.
Setting
Select System-Device name from the
drop-down list box.
Select COM1 from the drop-down list
box. In this example,
Communications Port is set to
COM1. During actual configuration,
set the communications port based
on the actual situation.
In this example, Device Address is
set to 1. During configuration, set the
actual device address.
Select ATS from the drop-down list
box.
Select ATS or ATS Abb-mx250 from
the drop-down list box.
● If the ATS model is OTM_C_D or
ATS022, select ATS. After adding a
device, choose Monitoring >
Power Distribution > ATS >
Running Parameters and
manually modify the Detailed
model based on the actual model
information.
● If the ATS model is MX250, select
ATS Abb-mx250.
Select System-Device name from the
drop-down list box.
Select COM2 from the drop-down list
box. In this example,
Communications Port is set to
COM2. During actual configuration,
set the communications port based
on the actual situation.
In this example, Device Address is
set to 1. During configuration, set the
actual device address.
Select PDU from the drop-down list
box.
7 FAQ
Description
and set the
layout by
referring to
7.9.2.1
Adding a
Transformer
Temperatur
e Controller
and 7.9.4
Creating a
FusionPowe
r6000 Plan
View.
-
-
98